DeWalt DW735 13" Carbide Tipped Planer Knife set of 3

!±8±DeWalt DW735 13" Carbide Tipped Planer Knife set of 3

Brand : DEWALT
Rate :
Price :
Post Date : Nov 01, 2011 00:20:06
Usually ships in 1-2 business days

TCT Carbide Tipped Moulder Knives offer over 1,000% (10 times) the tool life of T1-HSS. Carbide is used on hardwoods (i.e. Hickory, Hard Maple, MDF, plywood, etc.) Carbide is very hard (~92 Rc)and should be sharpened using a diamond wheel or silicon carbide type.. Carbide can wear over 100,000 lineal feet, but is also brittle and can chip if the wood is not free of staples or rocks.

Shop For Enfamil Newborn Nursette Bottles

Makita Thickness Planer 2012NB Review

!±8± Makita Thickness Planer 2012NB Review

Are you looking to use a thickness planer in your home shop or on the job site? Here is a down and dirty review of the portable Makita Thickness Planer 2012NB.

This review will be short and generally informative. However, if you would like to see more detailed information, whether it is the Makita or other brands like Dewalt or Ridgid please see the link information below that will take you to our review site.

The Makita 2012NB Review:

The Makita 2012NB is a relatively compact thickness planer. It is light weight compared to other brands, which makes it easy to transport to and from the jobsite or just around your home shop- not to mention the ease of storage.

The Makita cutting blades are dual sided, as is common with most brands, but are very narrow. They are intended to be used for cutting until dull and then tossed out and replaced. And since the cutting head has only 2 blades vs. the three blades on other models- replacement may be cheaper (if they in fact last as long as a three bladed system). The changing of blades on the 2012NB is pretty easy and shouldn't take more than 15 minutes. The cutting head moves up and down, thus allowing a permanent feed table and rollers to handle longer lumber.

This tool has a 15 amp motor with a no-load RPM of about 8500. It is actually very quiet when compared to other brands like DeWalt and Ridgid. It runs quietly at a low 83 decibels. One nice feature is the indicator light that shows when the machine is plugged in (this is a good safety feature to alert you prior to changing blades).

The Makita has about a 12 inch width capacity and a little over a 6 inch depth range. Using the clearly illustrated cutting depth gauge is a must. Because the tool is based in the metric system the adjustments are about 2milimeters instead of the more standard 1/16th of an inch.

As another important point, you should look into using a dust control system. This will help keep your tool and your shop much cleaner and thus safer and better quality work.

If you are doing any sort of fine woodworking like cabinet or furniture building, you really need to consider using a thickness planer. With the help of jigs and a few other hand tools like a router, it can even substitute for a jointer. There are a number of brands out there that give you different options and value so do a little research before you buy a thickness planer.

Makita Thickness Planer 2012NB Review

Rca Wsp150 Compare Shop Spiral Garden Hose

DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer

!±8± DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer

Rate : | Price : Too low to display | Post Date : Oct 24, 2011 09:50:06
Usually ships in 24 hours

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.

12-1/2-Inch Thickness Planer with Three Knife Cutterhead At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm 96 cuts per inch for a fine finish Disposable, reversible steel knives are easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 12-1/2-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

Create custom stock with the thickness planer's 10,000 rpm three-knife cutterhead. View larger.

Versatile planer cuts a wide range of hardwoods. View larger.

Powerful 15 Amp Motor for Deep, Clean Cuts
Benchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.

This planer's powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.

Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Effective Dust and Debris Management
The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.

Large Capacity and Easy, Accurate Depth Adjustment
This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.

The DEWALT DW734 features extra-long feed tables for material support.

• DEWALT DW7350 Planer Stand with Integrated Mobile Base
• DEWALT DW7342 Replaceable Knives for DW734
• Woodstock W1044 4-to-2-1/2-Inch Reducer
• MLCS 9167 Safety Push Block and Stick Package, 5-Piece
• DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity

Waste Composter Reviews